Liebherr LTM 1025 Specification

About the Liebherr LTM 1025

The Liebherr LTM 1025 all terrain crane has up to 26m of main boom and an additional jib up to 14.4m which gives the crane a great lifting height and radius considering its class. With a 3.3te counterweight, the Liebherr LTM 1025 travels with just 12te per axles - i.e. a total 24te axle load.

Download Liebherr LTM 1025 Spec Sheet

CRANE HIRE QUOTE

Technical Summary for the Liebherr LTM 1025

Max Load Capacity25 tonnes
Main Boom From8.4 metres
Main Boom Up To26.0 metres
Additional Jib From8.2 metres
Additional Jib Up To14.4 metres
Ballast / Counterweight As Travels3.3 tonnes
Additional Ballast / Counterweight0 tonnes
Total Ballast / Counterweight3.3 tonnes
Number Of Axles2 axles
Axle Load12.0 tonnes per axle
Total Axle Load24.0 tonnes
Axleload calculation based on as travels with 3.3t counterweight.
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.

Dimensions As Travels for the Liebherr LTM 1025

HeightWidthLength
3.54 metres2.6 metres9.65 metres
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.

Outrigger Base for the Liebherr LTM 1025

Outrigger SetupWidthLength
Fully Rigged5.5 metres6.254 metres
Half Rigged4.4 metres6.254 metres
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.

Hook Block for the Liebherr LTM 1025

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
25.0510200
18.337140
8.113120
2.8-160
----
----
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.

Crane Carrier for the Liebherr LTM 1025

FrameLiebherr designed and manufactured, box type, torsion resistant, all-welded construction made of high tensile structural steel.
Outriggers4-point support; all-hydraulic vertical and horizontal operation.
EngineDiesel, 6 cylinder, watercooled, make Liebherr, type D 916 T, output 170 kW DIN (231 HP) at 2100 1/min, max torque 800Nm at 1400 1/min.
TransmissionPower-shift gear with torque convertor and lock-up, 6 forward and 2 reverse speeds; additional activation of front wheel drive.
AxlesFront' planetary axle with differential lock, steerable. Rear: planetary axle with differential lock, steerable.
SuspensionHydropneumatic suspension, lockable hydraulically.
Tyres4 tyres. Tyre size 14.00 R 25.
SteeringFront axle mechanically steered, with hydraulic power assistance and stand-by-steering pump. Rear axle hydraulically steered. Both axles steered hydrostatically from crane cab.
BrakesService brake: 2-circuit air booster brake acting on all wheels. Hand brake: spring loaded, acting on all wheels.
Driver’s CabMade of galvanised steel sheet, located at side of carrier above front axle.
Electrical System24 V DC, 2 batteries, lighting accoding to countries' regulations.
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.

Crane Superstructure for the Liebherr LTM 1025

Crane Drive1 axial piston variable displacement pump and 1 triple gear pump in crane carrier driven by Diesel engine, open hydraulic circuits with "load sensing", operation of 4 movements simultaneously.
HoistAxial piston fixed displacement motor, hoist drum with integrated planetary gear and spring loaded static brake.
SlewHydraulic motor, planetary gear with spring loaded static brake. Continuous control of slewing speed.
Telescopic Boom1 boom pivot section and 3 telescopic sections. All sections hydraulically extendable under load.
Crane CabFully galvanised construction, safety glazing, control elements and instruments for crane operation and travelling.
Technical information provided here for the Liebherr LTM 1025 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1025.
Comments for this post are closed.